MOUNTUP モニタアーム 液晶ディスプレイアーム ガススプリング 16～32インチ対応 縦並び 耐荷重2～8kg VESA75*75 100*100 グロメット式 クランプ式 ポール アーム付き 角度調節

【1】

上下左右自由に固定できます。

【2】

モニターとアームを固定する為にモニターの背面に4本、上から1本ネジ止めするのだが、上から止めるネジを入れる穴のネジ山が潰れていてネジが入らなかった。返品するのが面倒なので連絡はしませんでした。ネジ山がうまく切られていれば星5。

【3】

とても良い商品

【4】

モニターを置いていたスペースが使えるし、視線が上がったので姿勢が良くなりました。アーム本体はがたつきや緩くなることもなく期待通りの機能で問題ありません。値段的には満足してます。

【5】

使えることは使えますが。デスクに取り付けるポールが傾くので剛性は低いです。正直不安になります。後、一番気になるのはディスプレイを横に移動させるとディスプレイが傾くのは何とかなりませんか？そこまで動かさないのですが毎回水平の調整が面倒くさいです。

【6】

メディアを読み込めませんでした。外国の方のレビューしかないけど半額のクーポンがあったので人柱になるつもりで購入しました。値段は半額で約3800円だったかな？それなのに充分使えるしもう最高！！！！それ以外の言葉見つからん！しいて言うなら後ろのスペースがちょっと必要かなって感じ！でもそんなの気にならんぐらい perfect‼️これ買わなければ損するってレベル！半額のクーポンがあって迷ってるならみんな買っちゃえ！

【7】

見た目なんてどうでもいい、モニターアームとして機能すればなんの問題もないという方には安価でオススメです！アームが太く、見た目はかなり無骨ですが取付が簡単で好きな位置にしっかり止まります。18.5インチのモバイルモニターというかなり軽い部類のモニターを設置していますが、勝手に上がってしまうこともなく位置調整も楽々。説明書もわかりやすく、取付に迷うこともありませんでした。六角レンチを保管しておけるのも便利。アームの機能は特に何も問題ないです。あとは耐久性ですが、頻繁に動かすことがなければそんなに劣化の心配もないのではないでしょうか。見た目さえ気にしなければかなりコスパの高いアームだと思います。

【8】

細かいところの調整が力ずくでしかできず小回りも聞かなかったです。また、ネジが緩く送られてきてます。購入される方がもしいたら気をつけてください。

【9】

Easy install works as intended.

【10】

I was a little hesitant at first to buy this monitor arm at the price; I didn't want to go super expensive but wanted something that was going to last and be a good product (stable, well built, etc.).I read the reviews and then ordered this monitor arm.I received the arm and the instructions were super simple to process and the arm was put together in no time. I needed to mount a 27'' monitor that's probably about medium weight, and after adjusting the tensions the arm works exactly how I wanted, no droop, everything feels pretty precise when positioning, no issues holding the monitor up.The weight of the materials for the arm was nice and all the pieces looked to have good craftsmanship, no stripped bolts or anything when putting the arm together.I've had the arm now for 7 months now and no issues. I move my arm all the time to make room for my laptop from work.Recently I had misplaced my Allen keys to adjust the arm's tension and height. I contacted MountUp and their customer service was prompt and excellent. They were able to work with me and were able to send me out a new set of Allen keys, which I greatly appreciate.To me this is a 5/5 product.

【11】

The sliding ring on this arm allows it to be (by default) low enough that the pen display can rest on my desk at about a 30 degree angle, which is perfect for (my) drawing.You need to tighten the arm joints to get it to hold this specific monitor, that wasnt a problem with the included tools.The arm seems study enough once assembled and comes with a vesa mount and screws that worked out of the box with my GAOMON PD2200 21.5 InchThe arm doesnt seem to be overbuilt or underbuilt, I would stick to the weight(s) specified in the product description to be safe.I did have to use the included plastic spacers and the included washers to prevent the screws over penetrating... 😏 the back of the screen.The included tools and hardware seem sturdy enough.I will update the review if I have any issues, but right now, as it stands, I have no issues giving this product 5 stars.Only nitpick is the cable routing groves might as well be non-existent because the covers pop off all the time. A couple of zip ties serve as a good substitute.

【12】

I had another dual monitor mount earlier and realized I should have taken more care at reading the listings and looking at the pictures because the two monitors could not be adjusted separately and never aligned properly because the VESA holes were in different positions. This takes care of that issue perfectly--each arm moves independently. Putting it together isn't SUPER easy for one person but it's more than possible with patience. At the moment, the gas adjustment system is working well. You can't necessarily move the monitors up and down or angle them precisely on the fly because you really should keep the arms tight, but folding them in and out or otherwise swinging them is still very easy to do and I finally have two monitors that align perfectly.Fingers crossed that this lasts me a good long time.

【13】

Basically this works very well, but you really need to tighten it up to hold even a 21" monitor. I was afraid to overtighten at first, but as the customer service is reliable, I figured if I broke it, I'd return it. No problem. I muscled it a bit and it holds securely.