ERGOTRON エルゴトロン LX デスク デュアル モニターアーム

【1】

端的にまとめると・頑丈・しっかり止まる・でも取り付けはかなり簡単・白最高です。オプションアームも追加してトリプルモニタで、スタンディングデスクにて使用していますがかなり安定しています。支柱を止める金具が二つだからというのもあるんでしょう。今まで数千円～１万円程の安物アームを１０個くらい使ってきましたが、がっちり固定具合がダントツ一位です。動かし具合や動かした後の固定具合（首が落ちる事が無い）もバッチリ。個人的に気になるのは、アームを固定するときに支柱に絶対傷が付くことくらいですね。（背面に付けるようにすれば気にはなりません）値段が群を抜いて高く、言葉通り本当に一生ものというわけではないと思いますが、その値段と言葉に恥じない作りです。

【2】

27型と32型モニターを取り付けました。とても頑丈でがっちり固定してくれます。デスクスペースが空いて、用途別にモニターを自由に動かせる。とても良い。値段は高いですが満足できます。

【3】

ディスプレイが増えたことを機にデュアルに買い換えました。その前のアームもエルゴトロン製で3年ほど毎日頻繁にアーム動かしまくってたんですが全く緩むことなくド安定でした。(前の奴は誰かにあげる予定。まだ全然使えるんで。高かったし)数千円の他社製品を以前1年ほど使ってるうちに画面に繋がる根本部分がバカになってガクンと下を向いた状態になってしまったので、かなり酷使する方だと思うのですがエルゴトロンの耐久性はガチです。でも4万はちょっと…ってなるなら1万ぐらいの奴でもいいと思う。高いからね。

【4】

高い分品質は良いです。余ったシングルと合わせて3つのモニターを固定しています。夜間等静かなときにまれに屋鳴りのように音が鳴ります。（モニター本体の音かも知れませんが慣れないと気になるかもしれません）

【5】

可動域が物凄く、軽い力で曲げれるので、寝る際はベッドの方に向けてYoutube見ながら寝落ちするみたいなことができて最高。

【6】

今となってはかなり高級品になってしまいましたが、それでもモニタアームを使うなら候補に入れておきたい製品です。調整に時間をかければかけただけ、楽に扱うことができます。品質も価格分の価値はある……と言いたいですが、流石に値段が高すぎます。少なくとも私はモニタアームに2万円（1画面あたり）もかける気にはなれません。

【7】

動かした位置でしっかり止まってくれます👍値段は高いけど後悔はないです！

【8】

安心のクオリティ

【9】

Excelente producto muchas gracias a :Servicios Comerciales Amazon México S. de R.L. de C.V. de lo mejor que he comprado, me ayuda para capturar cosas de gaming o programar con 2 pantallas muy buenos una inversion que valio la pena

【10】

Gracias a este soporte, mi escritorio vuelve a ser útil para realizar otras actividades tan normales como escribir sobre él.

【11】

About a year ago my office was notified we would be moving to a different floor in our office building and would be getting new Steelcase office furniture (cubicles and a chair). At the time I was using two monitors sitting on desk stands that didn't have any adjustment range. One monitor stand was so short I had it sitting on a empty portable camera box to get the the monitor heights about even. The monitors took up a lot of desk space and I had to lean in to read the screens with my computer reading glasses. Our building services and IT folks had no suggestions so I did the reasearch on monitor stands and whether they would fit the new cubical desktops. Fortunately the new furniture had a cable route space gap at the back that would allow the C-Clamp mount to work fine.After researching all kinds of monitor stands online I found the Ergotron LX dual monitor stand fit my needs just right. The MSRP price was good and the Amazon price was excellent. Free shipping on top of that and we had a deal.The dual monitor "kit" shipped with excellent packing and instructions and I had no difficulty in assembling it and mounting it to the back of the cubicle desk top.Since my PC operating position is in one corner of the cube I initially installed the base mount on the left but later moved it to the right side to get a little more left/right angle adjustment to avoid sun glare on my monitors coming in my office windows.Routing the cables along the articulating arms was easy and I am happy with the installation. At our floors open house where we had visitors looking at how our offices/cubes were layed out, folks were asking what brand and model monitor stand I was using to see about getting their own.One thing I might have done differently was to order two single Ergotron LX articulating arms with bases so I could mount one on the left and one one right of my corner desktop to be able to move the monitors closer to the operater (me).I'm still satisfied with the additional desk space provided and the range of movement the Ergotron provides, I will keep it for a long time. If there's another office move it will be the first thing I pack to go with me.7/15/2013 Well, I've had to move my office to another floor and I'm still using the same Ergotron listed above. The monitor arms are still working great and moving the stand was easy. I even got the chance to upgrade my monitors to (2) two new ViewSonic VP2365-LED 23" widescreen monitors (also purchased on Amazon). They're great too. Please note when shopping for monitors or mounts, that the monitor can mount to the stand you're considering and vise versa. Mine uses the "VESA" standard (4) screw mount. To use, just unscrew the monitor from the fixed base it comes with and attach it to the compatable monitor arm mount. If only the hundred cardboard moving boxes I had to assemble, pack, and unpack were as easy to work with, I would be a happy camper.12/14/2016 This dual monitor stand is still going and I'm still happy with it. So much so that I have recommended one for my boss who has finally decided she should upgrade to a dual display to keep up with the mounds of PC information she deals with every day. I had forgot this review but recently discovered it again while looking for the model number of the one I purchased in 2010. This is the one I will order for her based on my experience with my Ergotron LX. I wish my PC's were as reliable as this dual monitor stand have been.

【12】

This arm is almost exactly what I was looking for.* Very full range of motion for two monitors. I can pull them out, push them back, tilt them forward or sideways, raise them, etc.* I can mount it against a wall, push the monitors back, and only require about two inches of buffer between the desk and the wall. This allows me to use my full desk depth and not require buffer off of the wall.* Sturdy. Tensions are adjustable. No sagging after a week of use.* The rail allows both monitors to be easily aligned, minimizing the hassle of manually aligning individual arms.I mounted two 27" 2k (16:9) monitors and they fit fine. The Ergotron website compatibility checker said they wouldn't fit, but they do and I have about 1/2" buffer left on the rail. Between that and that it's rated for up to 20 lbs per monitor, I would imagine that almost any set of 27" monitors would fit on this. Larger monitors will likely require the next size of of the Ergotron 2 monitor rail mount.The biggest downside is probably the cable management, or lack thereof. The only provided cable management is that the lower half of the arm has a removable plate at the bottom that allows a couple cables to be run through it. I have 2 display cables and 1 power cable per monitor (6 total) and they don't come close to all fitting. I have to do the cable management myself.A more minor downside is that if the monitors are pushed back with the arm angled to the side (ex, there's a wall behind the monitors) the monitor stand won't align with the center of the monitors unless the monitors are very high. The arm is made of two pieces of unequal length (all Erogotron arms are), so angling the arm to the side and having the top piece double back the bottom piece yields a center stand that is 2-3 inches offset from the center of the monitors.As an aside, here's a detailed schematic showing the exact measurements: https://www.ergodirect.com/18667-ergotron-45-489-026-lx-desk-mount-dual-direct-arm-polished-aluminum.html

【13】

I bought this monitor stand under the advice of a friend and he was spot on with the suggestion. These hold my monitors up and don't budge a bit, they seem to be made from quality materials and the installation is very simple.